Did u have a parts list of exacts on what u used for the gun and tanks and parts ?
Not really, the aluminum parts were the hardest to come by. I had to ask around for the dimensions and then have them custom made by a friend in Cali. The bollard tubes, issued a 8" inner dia for the main tank and( not exact but) and 3" inner Dia for the secondary tanks. When you buy bollard tubes online the size/diameter is measured on the inside to fit a certain sized post. So if you want a 4" putter dia tube then you need to order a 3" inner dia bollard tube. The blower, I used a piece of pvc that seemed the right size in dia, and cut it lengthwise. I used 5 hinges but if I did it again I'd def use a long piano hinge and cut it to size. You can find those at Home Depot and Aubuchon hardware. Then of course there's the 3D printed parts. I designed those all my self. The hardest parts to get other than the aluminum are the cateye bicycle lamps that go on top of the secondary tanks. I had to search EBay for months to find those.
And as for the electronics, I had a custom pack lights board and pack blaster sound board made by Doug Keithley (spongface on Gbfans). And used Jupiter electronics for the added lights in the blower.
Write something about yourself. No need to be fancy, just an overview.